Cable Strippers
Prepare cable ends for neat connections with a stripper matched to the insulation you need to remove. This category brings together Jokari cable knives, a round-cable sheath stripper and an automatic wire stripper. The key choice is whether you are removing the cable's outer jacket or stripping an individual conductor.
Match diameter and conductor size
The Secura No. 27 and Standard No. 28H cable knives work on round cable sheaths from 8 to 28 mm diameter; the 28H adds a hook blade. Uni-Plus covers round cables from 8 to 15 mm and includes stripping notches for 1.5 and 2.5 mm² conductors. Super 4 Plus automatically strips individual solid or stranded wires from 0.2 to 6 mm².
Check insulation type, working space and required strip length alongside the stated range. A length stop helps when preparing repeated connections. Set adjustable cutting depth carefully and inspect the first stripped end for conductor damage. These tools must not be used on or near live circuits.
Frequently asked questions
What is the difference between stripping a wire and removing a cable sheath?
Wire stripping removes insulation from an individual conductor. Sheath removal opens the outer covering around several conductors or cable layers. Choose an individual-wire stripper, sheath remover or coax tool for the layer and cable construction you need to prepare.
How do I choose the correct stripping range?
Match the tool's stated range to the conductor cross-section or cable diameter, whichever the specification uses. These are different measurements. Also consider solid or stranded conductors and insulation type; one quoted range does not establish suitability for every cable construction.
When is an automatic wire stripper useful?
An automatic stripper can speed up repeated preparation of supported wire sizes by adjusting its gripping or stripping action. Manual tools offer direct adjustment for particular cables. Both still need to suit the conductor, insulation and required stripped length.
Do coaxial and network cables need specialist stripping tools?
Often. Coaxial cables have several layers that need controlled cutting depths, while data cable preparation must avoid damaging insulation and conductors. Choose a tool explicitly suited to the cable type; a general outer-sheath tool does not perform every preparation step.
Can I use any replacement blade in a cable stripper?
No. Blade profile and mounting are model-specific. Match the spare part to the exact tool reference and intended cable operation. A replacement blade set is a spare part rather than a complete stripping tool, even when shown beside the tool.



