Detectors
Plan a fixing point with a wall detector that helps locate concealed material before drilling. The DEM600 is intended for detecting wood, ferrous metal and AC live wires within its specified limits. It brings these checks together in one instrument for investigating a wall rather than relying only on its surface appearance.
Read the wall, then assess the result
Check the supported materials, detection depth and calibration procedure before use. Wall construction, covering thickness and the position of hidden objects influence detection, so the maximum stated depth is not a promise for every material or situation.
Scan the area in more than one direction and follow the manual when interpreting indications. A wall detector cannot prove that wiring is absent or de-energised. Treat its result as guidance for planning the fixing and assess the wall and installation before you drill.
Frequently asked questions
What can a wall detector help me locate?
A suitable wall detector helps locate wooden studs, ferrous metal and live AC wiring within its supported modes. Use it to investigate a planned fixing position. Detection capability depends on the target and the wall construction.
Is a wall detector the same as a cable tracker?
No. A wall detector scans an area for supported hidden materials. A cable tracker uses a signal to identify or follow a connected cable. Choose according to whether you need to inspect a wall or trace a particular wire.
What should I compare when choosing a wall detector?
Compare supported materials, detection modes and depth ratings for each target type. A single maximum-depth figure does not apply equally to wood, metal and wiring. Also consider the display and how clearly it indicates detected edges or positions.
Does a clear scan guarantee that I can drill safely?
No. Wall materials, target depth and installation conditions can prevent detection. Treat scanning as one check alongside plans and other information. A detector result alone does not establish that a drilling point is free of cables or pipes.
Can a wall detector prove a cable is de-energised?
No. A live-wire detection mode is an indication function, not a test proving absence of voltage. Use the appropriate electrical testing method and equipment when verifying that a circuit is de-energised.
