Switching Mode
Supply a circuit with DC power using a switching power supply suited to the required voltage and load. This group combines adjustable laboratory models with fixed 13.8 V supplies, covering different test setups rather than one interchangeable type of power source.
Adjustable or fixed output?
Adjustable models include 0–30 V versions with maximum currents of 3, 5, 10 or 20 A, and a 0–60 V version rated up to 5 A. Choose the specific voltage/current combination your load needs. The fixed 13.8 V models offer 10 or 20 A maximum and are intended for equipment requiring that supply voltage.
Check behaviour as well as capacity
For an adjustable bench supply, compare the controls, voltage and current display and current-limiting operation. Check ripple, regulation and output specifications if your circuit is sensitive to supply variations. Switching operation alone does not tell you the complete output performance.
Read the manual before connecting the load, set the appropriate output and check polarity. Confirm the mains input and whether connection leads are included. Cables, connectors and the load must all suit the voltage and current used, particularly when choosing a higher-current model.
Frequently asked questions
When should I choose a switching lab power supply?
Switching supplies are worth considering when you need substantial output power in a compact bench setup. Compare the actual voltage range, current capacity, ripple and regulation for your circuit rather than choosing by power alone.
Should I choose a fixed or adjustable switching supply?
Choose fixed output for equipment requiring that particular voltage. Choose an adjustable model when testing circuits with different supply requirements. A fixed 13.8 V supply is not a substitute for a broadly adjustable laboratory output.
How much current capacity do I need?
Allow enough capacity for the load's normal demand and any startup peaks. The load determines the current it draws at the set voltage. Choose suitable leads and terminals as well as a sufficient supply rating.
Can a switching supply power sensitive electronics?
Suitability depends on the circuit and the supply's ripple, noise and regulation specifications. Compare those values with the circuit's requirements. Switching topology alone does not establish whether a supply will suit a sensitive measurement or audio project.
Does a higher current rating mean I lose current limiting?
No: maximum output capacity and adjustable current limiting are different specifications. Compare the adjustment range and limiting behaviour of the chosen model. Set a limit appropriate to the circuit instead of relying on the maximum rating.






