Skip to Content

Products

Hook-up Wire

Wire a small circuit with colours you can follow from one connection to the next. These hook-up wire sets provide ten colours and 60 m of wire per set, with solid-core and stranded versions. Choose the conductor construction that suits the way you will position and connect your wires.

Solid core or stranded?

Solid-core wire holds a formed route more readily, which is useful for fixed wiring within an electronics project. Stranded wire is more flexible when you need to route it around parts. Match either type to the terminal or solder connection you intend to use; flexibility alone does not determine suitability.

Compare conductor cross-section, insulation and the specified voltage and current limits before cutting your lengths. Use colours consistently to distinguish supply, return and signal connections, and label your wiring plan. These sets are for connections within their stated ratings, not a substitute for selecting the correct cable for mains wiring. Check the colour lengths in the contents list when planning a larger assembly.

Frequently asked questions

Should I choose solid or stranded hook-up wire?

Solid wire keeps a formed shape and suits fixed connections. Stranded wire bends more easily for flexible leads. Choose the conductor construction around movement, terminal type and how the wiring will be installed.

Does the outside wire diameter tell me its conductor size?

No. Outside diameter includes insulation; conductor cross-section describes the conductive material and is usually stated in mm². Compare the stated cross-section rather than estimating electrical capacity from overall thickness.

Which wire colours are useful for electronics projects?

Different colours make it easier to identify supply, ground and signal connections. Establish a consistent colour convention and label important connections; colour alone does not confirm voltage, polarity or function.

Can hook-up wire be used for every electrical installation?

No. Suitability depends on conductor size, insulation ratings, temperature, installation conditions and applicable requirements. Internal electronics wire should not be assumed suitable for mains installation or high-current loads.

How do I choose wire for a connector or terminal?

Match the accepted conductor size and type, then use the termination method specified for that connector. Stranded and solid conductors may need different preparation; a wire that fits physically is not necessarily a suitable connection.