USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

DIP SWITCH 8 POSITIONS

DS-8
Support
Support
Compare

Specifications

  • number of switches: 8
  • length: 21.32mm
  • mechanical life: min. 10000 operations per switch
  • electrical life: min. 5000 operations per switch, 50mA/24Vdc
  • ratings:
    • non-switching: 100mA, 50Vdc
    • switching: 50mA, 24Vdc
  • circuit: single-pole single-throw
  • materials and finish:
    • case: UL94-VO, PBT. PBT is glass-fibre reinforced
    • cover: UL94-VO, PBT. PBT is glass-fibre reinforced
    • actuators: UL94-VO, PBT. PBT is glass-fibre reinforced
    • terminals: phosphor bronze with 3 micro inches of gold plating over nickel
    • top seal: polyester film
  • electrical and mechanical specifications:
    • contact rating (carry):
      • (a): 50Vdc 100mA in constant situation
      • (b): 24Vdc 50mA with make-and-break
    • contact resistance (at current 100mA):
      • (a): initially max. 30mohm
      • (b): 100mohm max. after life test
    • insulation resistance (at voltage 500Vdc): min. 1000Mohm between adjacent terminals
    • capacitance: 5pF between adjacent terminals
    • dielectric breakdown voltage: 500Vdc / 1minute
    • operating temperature range: -40°C to +70°C, no failures
    • shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microseconds
    • vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular to each other. No mechanical damage or intermittent change of switch setting during or after testing
    • markings: special side or top markings are optional
  • packing:
    • all DIP switches are shipped in standard IC tubes with all poles in the 'off' position

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change