13 different functions: impulse switch, staircase light control, slow ON/OFF dimmer, interval timer, speed adjustment for fans, etc…
suitable for both resistive and inductive loads (light bulbs, high-voltage halogen lighting and low-voltage halogen lighting with ferromagnetic transformer)
"Soft Start" prolongs the life of the bulbs
an advanced security system with fault indication automatically deactivates the module if the load or no-load behaves too inductively
can be operated from several locations, simply by the parallel connection of push buttons
2 delay times (anywhere between 5 sec. to 2 hours each) can be programmed through the learning mode
memory is protected against power failures
equipped with fuse and key for function selection
equipped with a mains suppressor according to EN55015 norms
Specyfikacje
supply voltage: 110-125V or 220-240Vac, 50 or 60Hz
automatic detection of mains frequency: 50 or 60Hz
max. load: 2.5A (300W / 120V - 600W / 230V)
dimensions: 100 x 82 x 36mm / 3.9 x 3.2 x 1.4"
microcontroller technology
13 different functions: impulse switch, staircase light control, slow ON/OFF dimmer, interval timer, speed adjustment for fans, etc…
suitable for both resistive and inductive loads (light bulbs, high-voltage halogen lighting and low-voltage halogen lighting with ferromagnetic transformer)
"Soft Start" prolongs the life of the bulbs
an advanced security system with fault indication automatically deactivates the module if the load or no-load behaves too inductively
can be operated from several locations, simply by the parallel connection of push buttons
2 delay times (anywhere between 5 sec. to 2 hours each) can be programmed through the learning mode
memory is protected against power failures
equipped with fuse and key for function selection
equipped with a mains suppressor according to EN55015 norms
Specyfikacje
supply voltage: 110-125V or 220-240Vac, 50 or 60Hz
automatic detection of mains frequency: 50 or 60Hz
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.
