Constant current with plastic housing constant current mode output with mutiple levels selectable by dip switch plastic housing with class II design built-in active PFC function standby power consumption < 0.5 W functions: DALI interface (logarithm or linear dimming curve selectable) push dimming synchronization up to 10 units current level: selectable via DIP switch, plese refer to "DIP SWITCH TABLE" section 3 years warranty Specifications Product basic info Primary colours Grey Additional colours Blue Depth unit 12.35 cm Height unit 2.3 cm Width unit 8.15 cm Weight unit 260 g Material Plastic + PS/LED
Electrical data Standby power consumption 0.5 W Environment specifications operating temperature: -30 to +90 °C max. case temp. : +90 °C operating humidity: 20-90 % RH non-condensing storage temperature humidity: -40 to +80 °C, 10 -95 % RH temperature coefficient: ± 0.03 %/°C (0-50 °C) vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes Functionality specifications temperature compensation: by external NTC thermistor dimming synchronization Input specifications voltage range: 180-295 VAC 254-417 VDC frequency range: 47-63 Hz power factor (typ.): >= 0.975 / 230 VAC; >= 0.96 / 277 VAC at full load total harmonic distortion: lower than 20 % when output load is 75 % or higher efficiency (typ.): 92 % AC current (typ.): 0.32 A / 230 VAC; 0.27 A / 277 VAC inrush current (typ.): cold start 20 A (twidth = 270 µs measured at 50 % Ipeak) at 230 VAC max. number of PSUs on 16 A circuit breaker: 25 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230 VAC leakage current: < 0.5 mA / 240 VAC standby power consumption: < 0.5 W for Blank-Type, < 1.2 W for AUX-Type Mean time between failures (MTBF) MTBF: 193.6 K hrs min. MIL-HDBK-217F (25°C) Protection specifications short circuit: constant current limiting, recovers automatically after fault condition is removed overvoltage: 105-125 V protection type: shut down output voltage, re-power on to recover over-temperature: shut down output voltage, re-power on to recover Safety and EMC specifications safety standards: UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved, GB19510.14, GB19510.1, BIS IS15885, EAC TP TC 004 approved DALI standards: comply with IEC62386-101, 102, 207 withstand voltage: input to output: 3.75 kVAC isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 40 % rated power); EN61000-3-3, GB17625.1, GB17625.1, GB17743, EAC TP TC 020 EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge 2 kV), EAC TP TC 020
Technical data Power rating 60.3 W Dimmable Output specifications selectable current: 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA / 1400 mA DC voltage range: 2-90 V / 2-90 V / 2- 86 V / 2-67 V / 2-57 V / 2-42 V rated power: 60.3 W open circuit voltage (max.): 95 V current ripple: 5.0 % max. @rated current current tolerance: ± 5.0 % auxiliary DC output: nominal 12 V (deviation 11.4 - 12.6 V) @50 mA for AUX- Selectable current
Set-up options Dimming type Push dimming
Environmental data Usage location Indoor only
Operational properties Power factor correction function (PFC)
constant current mode output with mutiple levels selectable by dip switch plastic housing with class II design built-in active PFC function standby power consumption < 0.5 W functions: DALI interface (logarithm or linear dimming curve selectable) push dimming synchronization up to 10 units current level: selectable via DIP switch, plese refer to "DIP SWITCH TABLE" section 3 years warranty Specifications Product basic info Primary colours Grey Additional colours Blue Depth unit 12.35 cm Height unit 2.3 cm Width unit 8.15 cm Weight unit 260 g Material Plastic + PS/LED
Electrical data Standby power consumption 0.5 W Environment specifications operating temperature: -30 to +90 °C max. case temp. : +90 °C operating humidity: 20-90 % RH non-condensing storage temperature humidity: -40 to +80 °C, 10 -95 % RH temperature coefficient: ± 0.03 %/°C (0-50 °C) vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes Functionality specifications temperature compensation: by external NTC thermistor dimming synchronization Input specifications voltage range: 180-295 VAC 254-417 VDC frequency range: 47-63 Hz power factor (typ.): >= 0.975 / 230 VAC; >= 0.96 / 277 VAC at full load total harmonic distortion: lower than 20 % when output load is 75 % or higher efficiency (typ.): 92 % AC current (typ.): 0.32 A / 230 VAC; 0.27 A / 277 VAC inrush current (typ.): cold start 20 A (twidth = 270 µs measured at 50 % Ipeak) at 230 VAC max. number of PSUs on 16 A circuit breaker: 25 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230 VAC leakage current: < 0.5 mA / 240 VAC standby power consumption: < 0.5 W for Blank-Type, < 1.2 W for AUX-Type Mean time between failures (MTBF) MTBF: 193.6 K hrs min. MIL-HDBK-217F (25°C) Protection specifications short circuit: constant current limiting, recovers automatically after fault condition is removed overvoltage: 105-125 V protection type: shut down output voltage, re-power on to recover over-temperature: shut down output voltage, re-power on to recover Safety and EMC specifications safety standards: UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved, GB19510.14, GB19510.1, BIS IS15885, EAC TP TC 004 approved DALI standards: comply with IEC62386-101, 102, 207 withstand voltage: input to output: 3.75 kVAC isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 40 % rated power); EN61000-3-3, GB17625.1, GB17625.1, GB17743, EAC TP TC 020 EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge 2 kV), EAC TP TC 020
Technical data Power rating 60.3 W Dimmable Output specifications selectable current: 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA / 1400 mA DC voltage range: 2-90 V / 2-90 V / 2- 86 V / 2-67 V / 2-57 V / 2-42 V rated power: 60.3 W open circuit voltage (max.): 95 V current ripple: 5.0 % max. @rated current current tolerance: ± 5.0 % auxiliary DC output: nominal 12 V (deviation 11.4 - 12.6 V) @50 mA for AUX- Selectable current
Set-up options Dimming type Push dimming
Environmental data Usage location Indoor only
Operational properties Power factor correction function (PFC)
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
REACH communicating information according to article 33 |WEEE
