|Change
Log in
CATEGORIES

Signum IoT Gateway

VMBSIG-V1

Signum IoT Gateway

VMBSIG-V1VMBSIG-V1VMBSIG-V1VMBSIG-V1VMBSIG-V1VMBSIG-V1

Product description

The Velbus Signum is an IoT Gateway for the Velbus home automation system. Its main functions are:
• to control your Velbus installation using an iOS app, Android app or browser on mobile devices (smartphone, tablet...)
• periodically sync the time on your Velbus installation with an NTP server
• time and date backup (48 hours) in case of power failure
• connect VelbusLink (Velbus configuration software) directly (with a USB cable plugged into the Velbus Signum, or an IP (LAN) connection)
• secure access to your Velbus Signum and home automation system from anywhere in the world

In the near future, the following functions will also be available:
• IoT gateway to allow integration/communication with other protocols
• advanced visual configuration of your Velbus installation (and connected systems)
• manually or periodically back-up your local Velbus project/settings on the Velbus Signum

The Velbus Signum is a DIN-rail module that is powered by and connected directly to the Velbus bus.

  • carrier board with Computer-on-Module (COM) (RPI CM3+/16GB)
  • RJ45 Ethernet port (10/100 Mbps)
  • onboard USB A 2.0 host port (500 mA)
  • onboard USB B 2.0 slave galvanic insulated Velbus configuration port
  • a USB micro 2.0 console port
  • onboard micro SD card slot for flash storage
  • master clock for Velbus system with 48-hour time and date backup in case of power outage
  • onboard CAN terminator switch
  • PS (Power Supply), RX (CAN Receive), TX (CAN Transmit), RUN and ACT status LEDs
  • DIN Rail mount and Velbus connector

Specifications

Product basic info
Primary coloursWhite
Depth unit58 mm
Height unit90 mm
Width unit71 mm
Weight unit128 g
MaterialPC (polycarbonate)

 

Physical properties
Width DIN modules4

 

Electrical data
Current consumption range100-500 mA

 

Technical data
Mounting typeDIN-rail mounting
ProtocolCAN bus

 

Environmental data
Operating temperature range0-40 °C

 

IT connections
SD card slot
Interface typeUSB
USB typeUSB 2.0
Compatibility smartAndroid, iOS®
Network port typeEthernet 10/100
Network interfaceLAN

 

Power supply
Input voltage rating VDC range12-18 V
Backup battery operating time2 h

 

Included
With LED indicators

 

  • Only a qualified professional may carry out the installation in conformity with in force legislation and standards.

Bar code

  • Bar code (EAN-13):5410329722609

Options

BESTSELLER

Crimping tool for cord-end sleeve
Compare
VTECT3

Crimping tool for cord-end sleeve

€ 24,95

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33 |WEEE

Printing and typographical errors reserved. All images and text are subject to change without prior notice.

Do not throw on public roads. Copyright Velleman Group nv. Generated on07/09/2024.

Tel.: +32 (0)9 384 36 11     E-mail address: customercare@velleman.eu

Customer Care