USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

SWITCHING POWER SUPPLY - SINGLE OUTPUT - 8 W - 24 V

APV-8-24
Support
Downloads (2)
Warranty
Support
Compare

Features

  • constant voltage design
  • universal AC input / full range
  • class II power unit, no FG
  • fully isolated plastic case
  • IP 42 design
  • small and compact size
  • cooling by free convection
  • protections: short circuit / overload / over voltage
  • no load power consumption: < 0.5 W
  • 100 % full load burn-in test
  • low cost, high reliability
  • 2 years warranty
  • for professional use only
  • This device must be installed by a qualified person.

Specifications

  • output:
    • DC voltage: 24 V
    • rated current: 0.34 A
    • current range: 0 ~ 0.34 A
    • rated power: 8.16
    • ripple noise: 300 mV p-p
    • voltage tolerance: 5.0 %
    • line regulation: 1.0 %
    • load regulation: 2.0 %
    • setup, rise time: 500 ms, 30 ms / 230 VAC 1500ms, 30 ms / 115 VAC at full load
    • hold up time: 20 ms / 230 VAC at full load
  • input:
    • voltage range: 90 ~ 264 VAC 127 ~ 370 VDC
    • frequency range: 47 ~ 63 Hz
    • efficiency: 81 %
    • AC current: 0.15 A / 230 VAC 0.3 A / 115 VAC
    • inrush current: cold start 70 A at 230 VAC
    • leakage current: 0.25 mA / 240 VAC
  • protection:
    • short circuit: hiccup mode, recovers automatically after condition is removed
    • over load: above 105 % rated output power
    • over voltage: 27.6 ~ 32.4 V shut off o/p voltage, clamping by zener diode
  • environment:
    • working temperatue: -30 ~ +70 °C
    • working humidity: 20 ~ 90 % RH non-condensing
    • storage temperature, humidity: -40 ~ 80 °C, 10 ~ 95 % RH
    • temperature coefficient: 0.03 %
    • vibration: 10 ~ 500 Hz, 2 G 10 min / 1 cycle, period for 60 min each along X, Y, Z axes
  • saftey & EMC:
    • safety standards: UL8750, CSA C 22.2 No 250.0 - 08 approved; design refer to EN60950-1, EN61347-1, En61347-2-13
    • withstand voltage: I/P - O/P : 3.75 K VAC
    • isolation resistance: I/P - O/P :> 100 Ohms / 500 VDC / 25 °C / 70% RH
    • EMC emission: compliance to EN55022, EN61000-3-2 class A, EN61000-3-3
    • EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11 ; ligth industry level (surge 2KV), critearia A
  • others:
    • MTBF: 1631.5 K hrs min MIL-HDBK-217F (25 °C)
    • dimension: 60 x 30 x 23.5 mm
    • packing: 0.09 k

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change