Constant current with plastic housing LBL_NONE_TAG
This product cannot be purchased as a private individual.
230 VAC only or full range (up to 295 VAC) models available built-in active PFC function constant current design protections: short circuit cooling by free air convection fully isolated plastic case class II power unit, no FG no load power consumption <0.5W high reliability, low cost Specifications output: constant current region: 22 - 36 V rated current: 0.35 A no load output voltage: 42 V rated power: 12.6 W ripple & noise (max): 5.5 Vp-p current: ± 5.0% setup time: 500 ms / 230 VAC at full load input: voltage range: 180 - 295 VAC, 254 - 417 VDC frequency range: 47 - 63 Hz power factor: PF > 0.95 / 230 VAC, PF > 0.9 / 277 VAC (at full load) total harmonic: THD < 20% when output loading > 60% at 230 VAC input and output loading > 75% at 277 VAC input efficiency: 84 % AC current: 0.08 A / 230 VAC, 0.07 A / 277 VAC inrush current: cold start 15 A (twidth=50µs measured at 50% Ipeak) at 230 VAC max. no. of PSUs on 16 A circuit breaker: 160 units (circuit breaker of type B) / 160 units (circuit breaker of type C) at 230 VAC leakage current: 0.25 mA / 240 VAC protection: short circuit: hiccup mode, recovers automatically after fault condition is removed environment: working temperature: -30 - +50 °C working humidity: 20 - 90% RH non-condensing storage temperature, humidity: -40 - +80 °C, 10 - 95% RH temperature coefficient: ±0.06% / °C (0 - 50 °C) vibration: 10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes safety & EMC: safety standards: ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.14,GB19510.1, IP30 approved withstand voltage: I/P-O/P:3.75K VAC isolation resistance: I/P-O/P:100M Ohms / 500 VDC / 25 °C / 70% RH EMC emission: compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C(>60% load);EN61000-3-3 EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria B(surge 2KV) others: MTBF: 808.162K hrs min. MIL-HDBK-217F (25 °C) dimensions: 145 x 38 x 22 mm (L x W x H) 230 VAC only or full range (up to 295 VAC) models available built-in active PFC function constant current design protections: short circuit cooling by free air convection fully isolated plastic case class II power unit, no FG no load power consumption <0.5W high reliability, low cost Specifications output: constant current region: 22 - 36 V rated current: 0.35 A no load output voltage: 42 V rated power: 12.6 W ripple & noise (max): 5.5 Vp-p current: ± 5.0% setup time: 500 ms / 230 VAC at full load input: voltage range: 180 - 295 VAC, 254 - 417 VDC frequency range: 47 - 63 Hz power factor: PF > 0.95 / 230 VAC, PF > 0.9 / 277 VAC (at full load) total harmonic: THD < 20% when output loading > 60% at 230 VAC input and output loading > 75% at 277 VAC input efficiency: 84 % AC current: 0.08 A / 230 VAC, 0.07 A / 277 VAC inrush current: cold start 15 A (twidth=50µs measured at 50% Ipeak) at 230 VAC max. no. of PSUs on 16 A circuit breaker: 160 units (circuit breaker of type B) / 160 units (circuit breaker of type C) at 230 VAC leakage current: 0.25 mA / 240 VAC protection: short circuit: hiccup mode, recovers automatically after fault condition is removed environment: working temperature: -30 - +50 °C working humidity: 20 - 90% RH non-condensing storage temperature, humidity: -40 - +80 °C, 10 - 95% RH temperature coefficient: ±0.06% / °C (0 - 50 °C) vibration: 10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes safety & EMC: safety standards: ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.14,GB19510.1, IP30 approved withstand voltage: I/P-O/P:3.75K VAC isolation resistance: I/P-O/P:100M Ohms / 500 VDC / 25 °C / 70% RH EMC emission: compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C(>60% load);EN61000-3-3 EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria B(surge 2KV) others: MTBF: 808.162K hrs min. MIL-HDBK-217F (25 °C) dimensions: 145 x 38 x 22 mm (L x W x H)
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
REACH communicating information according to article 33 |WEEE
