USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

LED POWER SUPPLY - SINGLE OUTPUT - 25 W - 42 V

PLM-25E-700
New
Support
Infosheet
Support
Compare

PLM-25 is a 25 W economical AC/DC LED power supply series. Incorporating a built-in active PFC design, PLM-25 provides a high power factor value greater than 0.9. In addition, with the low no load power consumption below 0.5 W, and the setup time less than 500 ms, PLM-25 is complied with the ERP regulation required by European Union for lighting fixtures.

PLM-25 is a class II (without FG pin) power unit housed with the UL 94V-0 rated flame retardant plastic case. The I/O terminals are designed with screw-less clamp style terminal block that greatly simplifies the wiring installation. Two types of models with different input voltage range are offered: PLM-25 series, which operates from 110-295 VAC, and PLM-25E series, which operates from 180-295 VAC. These two series are both constant current output design, supplying models with the current of 350 mA, 500 mA, 700 mA and 1050 mA, respectively.

Features

  • 230 VAC only or full range (up to 295 VAC) models available
  • built-in active PFC function
  • constant current design
  • protections: short circuit
  • cooling by free air convection
  • fully isolated plastic case
  • class II power unit, no FG
  • class 2 power unit (for PLM-25-500/700/1050)
  • no load power consumption <0.5W
  • high reliability, low cost

Specifications

  • output:
    • constant current region: 21 - 36 V
    • rated current: 0.7 A
    • no load output voltage: 42 V
    • rated power: 25.2 W
    • ripple & noise (max): 5.4 Vp-p
    • current: ± 5.0%
    • setup time: 500 ms / 230 VAC at full load
  • input:
    • voltage range: 180 - 295 VAC 254 - 417 VDC
    • frequency range: 47 - 63 Hz
    • power factor: PF > 0.95 / 230 VAC, PF > 0.9 / 277 VAC (at full load)
    • total harmonic: THD < 20% when output loading > 60% at 230 VAC input and output loading > 75% at 277 VAC input
    • efficiency: 85 %
    • AC current: 0.15 A / 230 VAC, 0.12 A / 277 VAC
    • inrush current: cold start 15 A (twidth=50µs measured at 50% Ipeak) at 230 VAC
    • max. no. of PSUs on 16A circuit breaker: 80 units (circuit breaker of type B) / 80 units (circuit breaker of type C) at 230 VAC
    • leakage current: 0.25 mA / 240 VAC
  • protection:
    • short circuit: hiccup mode, recovers automatically after fault condition is removed
  • environment:
    • working temperature: -30 - +45°C
    • working humidity: 20 - 90% RH non-condensing
    • storage temperature, humidity: -40 - +80°C, 10 - 95% RH
    • temperature coefficient: ±0.06% / °C (0 - 50 °C)
    • vibration: 10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
  • safety & EMC:
    • safety standards: ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.14,GB19510.1,IP30 approved
    • withstand voltage: I/P-O/P:3.75K VAC
    • isolation resistance: I/P-O/P:100M Ohms / 500 VDC / 25 °C / 70% RH
    • EMC emission: compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C(>60% load);EN61000-3-3
    • EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria B(surge 2KV)
  • others:
    • MTBF: 808.162Khrs min. MIL-HDBK-217F (25°C)
    • dimension: 145 x 38 x 22 mm (L x W x H)

Customers who viewed this product also viewed


PCD-25-700B

LED POWER SUPPLY - DIMMABLE - SINGLE...

Compare

K8400

VERTEX 3D PRINTER

Compare

K8600

VERTEX NANO 3D PRINTER KIT

Compare

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change