Product description
Multimeters are small meters that do not cost much, but can save costs by detecting sources of error.
Whether you are a professional who works with electronics on a daily basis or an enthusiastic DIYer who likes to DIY, this digital multimeter offers reliable and accurate results.
The multimeter is equipped with various functions, including measuring voltage, current and resistance.
With a wide range of measurement ranges, you can make voltage measurements up to 500 VAC/DC, current measurements up to 10 A and resistance measurements up to 2M Ohms. A vibration alarm indicates when readings are available. Moreover, it comes with separate measurement leads, so you can get started right away.
With the built-in data hold function, you can easily hold and read measured values even after disconnecting the measurement leads. This ensures accurate and reliable measurements.
+ Built-in data hold function: This function allows you to easily hold and read measured values even after disconnecting the measurement leads. This ensures accurate and reliable measurements. + High accuracy with 1999 counts: This multimeter offers high accuracy in measuring various electrical values such as voltage (volts), current (amps) and resistance (ohms). + Safe electrical measurements: The instrument complies with safety category CAT III 600 V for increased safety. + Automatic and manual range setting. + Backlight: A large backlit display ensures good readability even in poor lighting conditions.
Specifications
Physical properties |
---|
Cable length | 0.7 m | Display height | 27 mm | Display width | 54 mm | Display type | LCD | Backlight | | Maximum digits display | 1999 |
Electrical data |
---|
AC voltage | - 0-200 V / 500 V
- basic accuracy: ± (1.5% rdg + 3 digits)
- input impedance: 450 kOhm
- frequency range: 40-500 Hz
- overload protection: 500 VDC or AC rms
| Audible continuity measurement | | Audible continuity | built-in buzzer sounds if resistance is less than 120 Ohm
| Automatic polarity indication | | DC current | - basic accuracy: ± (1.5% rdg + 2 digits), ± (2.0% rdg + 2 digits) for 200 mA range; ± (2.0% rdg + 3 digits) for 10 A range
- overload protection: 0.5 A / 500 V fuse for µA and mA range; 10 A / 500 V for 10 A range
| DC voltage | - basic accuracy: ± (1.0% rdg + 2 digits) , ± (1.2% rdg + 2 digits) for 500 V range
- input impedance: 1 MOhm
- overload protection: 500 V DC or AC rms
| Diode test | | Diode test specifications | - test forward voltage of diode
- forward DC current: approx. 10 µA
- reversed DC voltage : approx. 1.8 V
| Fuse type | F 0.50 A / 500 V, 5 x 20 mm, F 10 A / 500 V, 5 x 20 mm | Out of range indication | | Transistor test | | True rms | | AC voltage measurements | 0-200 V, 500 V | DC current measurements | 10 A, 2 mA, 200 µA, 200 mA | DC voltage measurements | 0-200 mV, 2 V, 20 V, 200 V, 500 V | Resistance measurements | 0-200 ohm, 2 kohm, 2 megohm, 20 kohm, 200 kohm | Resistance specifications | - basic accuracy: ± ( 1.0% rdg +5 digits); ± (1.0% rdg + 3 digits) for 2 kOhm to 200 kOhm range, ± (1.5% rdg + 3 digits) for 2 MOhm range
- overload protection: 0.5 A / 500 V fuse
|
Technical data |
---|
Safety rating | CAT II / 500 V, Cat III / 600 V | Voltage tester type | AC / DC | Automatic power-off function | | Pollution degree | 2 | Data-hold function | |
Environmental data |
---|
IP rating | IPx0 | Usage location | Indoor only | Operating temperature °C | 0-40 °C | Operating temperature °F | 32-104 °F | Storage temperature °C | -20-60 °C | Storage temperature °F | -4-140 °F | Maximum storage humidity | < 90 % | Maximum operating humidity | < 80 % |
Operational properties |
---|
Instruction manual languages | Dutch, English, French, German, Polish, Portuguese, Spanish |
Power supply |
---|
Batteries | | Number of batteries | 2 | Low battery indicator | | Battery composition | Alkaline | Battery IEC size | AAA (LR03, R03, FR03, HR03, KR03, ZR03 ,24A, 24D, 24LF, UM4, Micro, MN2400, MX2400, MV2400) |
Included |
---|
Set contents | test lead probe : CAT III 600 V - 12 A - 18 AWG - 70 cm
|
Product basic info |
---|
Colour unit | Black | Additional colour | Red | Depth unit | 30 mm | Height unit | 138 mm | Width unit | 67 mm | Weight unit | 120 g | Material | ABS |
Options
DVM020
Digital multimeter, datahold,...
DVM855
Digital multimeter, suitable for...
DVM857
Digital multimeter, suitable for...
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.
REACH communicating information according to article 33
|
WEEE
|