Product description
Multimeters are small meters that do not cost much, but can save costs by detecting sources of error.
Whether you are a professional who works with electronics on a daily basis or an enthusiastic DIYer who likes to DIY, this digital multimeter offers reliable and accurate results.
The digital true RMS multimeter is equipped with various functions, including measuring voltage, current, resistance, temperature and continuity.
With a wide range of measurement ranges, you can make voltage measurements up to 600 VAC/DC, current measurements up to 15 A and resistance measurements up to 60M Ohms. A vibration alarm indicates when readings are available. Moreover, it comes with separate measurement leads, so you can get started right away.
+ High accuracy with 6000 counts: This multimeter offers high accuracy in measuring various electrical values such as voltage (volts), current (amps) and resistance (ohms). + True RMS: Highly accurate readings thanks to true RMS measurement at voltages and currents that deviate from the sine wave, i.e. are unbalanced. + Automatic and manual range setting. + Temperature measurement: The multimeter measures the temperature difference between the two probes of the multimeter in degrees Celsius or Fahrenheit. A handy feature that not all multimeters have. + Safe electrical measurements: The instrument complies with safety category CAT III 600 V / CAT IV 300 V for increased safety.
Specifications
Physical properties |
---|
Cable length | 0.75 m | Display height | 28 mm | Display width | 60 mm | Display type | LCD | Backlight | | Maximum digits display | 6000 |
Electrical data |
---|
AC current | - basic accuracy: ± (1.5% rdg + 3 digits) for 0 to 600 mA range, ± (2.5% rdg + 5 digits) for 6 A to 15 A range
- frequency range: 40 Hz - 1 kHz
- overload protection: 0.8 A / 600 V fuse in µA and mA range; 15 A / 1000 V fuse in 15 A range
| AC voltage | - basic accuracy: ± (1.2% rdg + 3 digits) for 0 to 600 mV range , ± (0.8% rdg + 3 digits) for 6V to 600 V range, ± (1.2% rdg + 3 digits) for 600V
- input impedance: > 10 MOhm
- frequency range: 40 Hz - 1 kHz
- overload protection: 600V DC or AC rms
- AC true RMS
| Audible continuity measurement | | Audible continuity | - built-in buzzer sounds if resistance is less than 50 Ohm
- test voltage: approx. 1.0 V
| Automatic polarity indication | | Capacity | - basic accuracy: ± (3.0% rdg + 10 digits); ± (2.5% rdg + 5 digits) for 99.99 nF to 9.999 µF range; ± (5.0% rdg + 10 digits) for 99.99 µF; ± (10.0% rdg + 20 digits) for 999.9 µF to 99.99 mF range
- overload protection: 600 V DC or AC rms
| DC current | - basic accuracy: ± (1.2% rdg + 2 digits) for 0 to 600 mA range, ± (2.0% rdg + 3 digits) for 6 A to 15 A range
- overload protection: 0.8 A / 600 V fuse in µA and mA range; 15 A / 1000 V fuse in 15 A range
| DC voltage | - basic accuracy: ± (0.8% rdg + 2 digits) , ± (0.5% rdg + 2 digits) for 600mV to 600 V range, ± (0.8% rdg + 2 digits) for 600V
- input impedance: > 10 MOhm
- overload protection: 600 V DC or AC rms
| Diode test | | Diode test specifications | test voltage: approx. 3.2 V
| Duty cycle | - basic accuracy: ± (2.0% rdg + 2 digits)
- sensitivity: sine wave 0.6 V rms
- overload protection: 600 V DC or AC rms
| Frequency | - basic accuracy: ± ( 0.1% rdg + 5 digits)
- sensitivity: sine wave 0.6 V rms (9.999 MHz = 1.5 V rms)
- overload protection: 600 V DC or AC rms
| Fuse type | F 0.80 A / 600 V, 5 x 20 mm, F 15 A / 1000 V, 5 x 20 mm | Out of range indication | | Temperature measuring Celsius specifications | - basic accuracy :
- ± (3 °C + 1 digit) for -20 °C to 150 °Crange
- ± (3 % rdg + 2 digits) for 151 °C to 1000 °C range
| Temperature measuring Fahrenheit specifications | - basic accuracy:
- ± (5 °F + 2 digits) for -4 °F to 302 °F range
- ± (3 % rdg + 3 digits) for 303 °F to 1832 °F range
| Transistor test | | True rms | | AC current measurements | 0-600 µA, 15 A, 6 A, 600 mA, 6000 µA | AC voltage measurements | 0-60 mV, 6 V, 60 V, 600 mV, 600 V | Capacity measurements | 0-9.999 nF, 9.999 µF, 9.999 mF, 99.99 µF, 99.99 mF, 99.99 nF, 999.9 nF | DC current measurements | 0-600 µA, 15 A, 6 A, 60 mA, 600 mA, 6000 µA | DC voltage measurements | 0-60 mV, 6 V, 60 V, 600 mV, 600 V | Frequency measurements | 0-9.999 Hz, 9.999 kHz, 9.999 MHz, 99.99 Hz, 99.99 kHz, 999.9 Hz, 999.9 kHz | Duty cycle measurements | 0.1-99.9 % | Resistance measurements | 0-600 ohm, 6 kohm, 6 megohm, 60 kohm, 60 megohm, 600 kohm | Resistance specifications | - basic accuracy: ± ( 1.0% rdg +3 digits); ± (1.0% rdg + 2 digits) for 6 kOhm to 6 MOhm range, ± (1.5% rdg + 3 digits) for 60 MOhm range
- overload protection: 600 V DC or AC rms
- open circuit voltage: approx. 0.5 V
|
Technical data |
---|
Safety rating | Cat III / 600 V, Cat IV / 300 V | Voltage tester type | AC / DC | Automatic power-off function | | Data-hold function | |
Environmental data |
---|
IP rating | IPx0 | Usage location | Indoor only | Operating temperature °C | 0-40 °C | Operating temperature °F | 32-104 °F | Storage temperature °C | -20-60 °C | Storage temperature °F | -4-104 °F | Maximum storage humidity | < 90 % | Maximum operating humidity | < 80 % |
Operational properties |
---|
Measuring temperature range °C | -20-1000 °C | Measuring temperature range °F | -4-1832 °F | Instruction manual languages | Dutch, English, French, German, Polish, Portuguese, Spanish |
Power supply |
---|
Batteries | | Number of batteries | 1 | Low battery indicator | | Battery composition | Alkaline | Battery IEC size | E (6LR61, 6LP3146, 6F22, 6KR61, 6HR61 ,1604A, 1604D, 1604LC, 7.2H5, 11604, 11604M, PP3, 9-volt, 006P, MN1604) |
Included |
---|
Set contents | test lead probe : CAT III 1000 V / CAT IV 600 V, 15 A, L = 75 cm
|
Product basic info |
---|
Colour unit | Black | Additional colour | Red | Depth unit | 40 mm | Height unit | 177 mm | Width unit | 92 mm | Weight unit | 320 g | Material | ABS |
Options
TLM72
PVC test leads, set, CAT IV, 15 A, 2...
DVM040
Digital multimeter, data hold,...
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.
REACH communicating information according to article 33
|
WEEE
|