USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

SWITCHING POWER SUPPLY - SINGLE OUTPUT - 25 W - 5 V

APV-35-5
Support
Downloads (2)
Warranty
Support
Compare

Features

  • constant voltage mode power supply
  • universal AC input / full range
  • resists 300 VAC surge input for 5 seconds
  • protections: short circuit / overload / over voltage
  • cooling by free air convection
  • compact size
  • fully isolated plastic case
  • IP30 design
  • pass LPS
  • suitable for LED lighting and moving sign applications
  • low cost, high reliability
  • 100% full load burn-in test
  • 2 years warranty
  • for professional use only
  • This device must be installed by a qualified person.

Specifications

  • output:
    • DC voltage: 5 V
    • rated current: 5 A
    • current range: 0-3 A
    • rated power: 25 W
    • ripple & noise (max): 120 mVp-p
    • voltage tolerance: +/- 5.0%
    • line regulation: +/- 1.0%
    • load regulation: +/- 2.0%
    • setup, rise time: 1500 ms, 40 ms / 230 VAC 1500 ms, 40 ms / 115 VAC at full load
    • hold-up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
  • input:
    • voltage range: 90-264 VAC 127-370 VDC
    • frequency range: 47-63 Hz
    • efficiency (typ.): 76.5 %
    • AC current (typ.): 0.5 A / 230 VAC 0.75 A / 115 VAC
    • inrush current (max.): cold start 45 A (twidth = 440 µs measured at 50% lpeak) at 230 VAC
    • leakage current: 0.25 mA / 240 VAC
  • protection:
    • overload:
      • 110-160% rated output power
      • protection type: hiccup mode, recovers automatically after fault condition is removed
    • overvoltage:
      • 5.75 - 6.95 V
      • protection type: shut down output voltage, re-power on to recover
  • environment:
    • working temperature: -30 °C to +70 °C
    • working humidity: 20 - 90% RH non-condensing
    • storage temperature, humidity: -40°C to +80 °C, 10 to 95% RH
    • temperature coefficient: +/- 0.03 % / °C (0 to 50 °C)
    • vibration: 10 - 500 Hz, 2 G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
  • safety & EMC:
    • safety standards: UL8750, CSA-C22.2 No. 250.0-13 approved; design refer to EN60950-1
    • withstand voltage: input-output: 3000 VAC
    • solation resistance: input-output: > 100 MOhm; / 500 VDC / 25 °C / 70 % RH
    • EMC emission: compliance to EN55022, EN61000-3-2 Class A, EN61000-3-3
    • EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), criteria A
  • other:
    • MTBF: 692.800 hrs min. MIL-HDBK-217F (25°C)
    • dimensions: 84 x 57 x 29.5 mm

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change