Belgium - English (UK)
Change

LED POWER SUPPLY SINGLE OUTPUT 12 VDC 10 W

GP-LV8312-02
Support
Infosheet
Support
Compare

Features

  • for high brightness light-emitting diode products
  • universal AC input 90 ~ 264 Vac
  • fully isolated plastic case with IP65
  • built-in constant voltage design
  • operation from -10°C~ 40°C full load
  • protections: OVP/ OLP/ SCP
  • class II power design without earth pin
  • 1 year warranty

Specifications

  • output:
    • LED operation voltage: 12 VDC
    • rated current range: 830 mA
    • rated max. power: 10 W
    • efficiency (typ.) 230 Vac: 75%
    • rise time: < 250 ms at full load
  • input:
    • voltage range: 90 VAC - 264 VAC
    • frequency range: 47 Hz - 63 Hz
    • AC current: 0.2 A @ 115 VAC / 0.1 A @ 230 VAC
    • inrush current: no components will be stressed over its max specification according to I2T
    • leakage current: < 0.25 mA / 240 Vac
  • protections:
    • over load:
      • 100 ~ 135% rated output power
      • recovers automatically after fault condition has been removed
    • short circuit: hiccup mode, recovers automatically after fault condition is removed
    • over voltage: 105 - 120% rated output voltage
  • environment:
    • operation temp.: -10°C~ 40°C full load
    • operation humidity: 20% ~ 95% RH non-condensing
    • storage temp.: -20 ~ +80°C
    • storage humidity: 10% ~ 95% RH
    • vibration: 10 ~ 500 Hz, 2G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
  • safety & EMC:
    • safety standards: EN61347-1, EN61347-2-13, IP65 approved
    • withstand voltage: I/P - O/P: 3.75 K VAC
    • isolation resistance: >100 M Ohm / 500 VDC at 25°C
    • EMI conduction & radiation: EN55015
    • harmonic current: EN61000-3-2 Class C, EN61000-3-3
    • EMS immunity: EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11
  • others:
    • MTBF: 400,000 hours min.MIL-HDBK-217F (25°C)
    • dimension (L x W x H): 69.5 x 35 x 23 mm
    • packing (L x W x H) / Carton: 36 x 24 x 23 cm - 100 pcs / carton
    • weight: 105 g

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

Belgium - English (UK)

Change