Belgium - English (UK)
Change

ITE COMPACT SWITCHING POWER SUPPLY - SINGLE OUTPUT - 12 VDC - 3A - 36 W

MWGS36E12-P1J
Popular item
Support
Downloads (2)
Warranty
Support
Compare

Features

  • universal AC input / full range
  • no load power consumption < 0.3 W
  • ErP Step 2 compliant
  • meets EISA 2007 (Energy Independence and Security Act)
  • 2-pole Europlug
  • Class II (without earth pin)
  • protection against: short circuit / overload / overvoltage
  • fully enclosed in plastic case
  • approvals: TÜV / CB / CE
  • meets LPS requirements
  • 2 years warranty
  • stabilised output, low ripple & noise
  • short-circuit & overload protection
  • very high efficiency & low energy consumption

Specifications

  • output:
    • output voltage: 12 VDC
    • rated current: 3 A
    • max. output current: 0 - 3 A
    • power: 36 W
    • ripple & noise (max.): 100 mVp-p
    • voltage adj. range: 10.8 - 13.2 V
    • voltage tolerance: +/- 3.0 %
    • line regulation: +/- 1 %
    • load regulation: +/- 3 %
    • setup, rise, hold up time:
      • 1000 ms, 20 ms, 15 ms / 230 VAC
      • 1000 ms, 20 ms, 15 ms / 115 VAC at full load
  • input:
    • voltage range:
      • 90 - 264 VAC
      • 135 - 370 VDC
    • frequency range: 47 - 63 Hz
    • efficiency (typ.): 84.5 %
    • AC current (typ.): 0.7 A / 100 VAC
    • inrush current (typ.): 60 A / 230 VAC
    • leakage current: 0.25 mA / 240 VAC
  • protection:
    • overload:
      • 110 - 250 % rated output power
      • protection type: hiccup mode, recovers automatically after fault condition is removed
    • overvoltage:
      • 105 - 135 % rated output voltage
      • protection type: clamping by zener diode
  • environment:
    • operating temperature: -20 to +50 °C
    • operating humidity: 20-90 % RH non-condensing
    • storage: -20 to +85 °C, 10 - 95 % RH
    • temperature coefficient: +/- 0.03 %/°C (0 - 50 °C)
    • vibration: 10 - 500 Hz, 2G 10 min/1 cycle, period for 60 min each along X, Y, Z axes
  • safety & EMC:
    • safety standards: TÜV EN60950-1 approved
    • withstand voltage: input to output: 4242 VDC
    • isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
    • EMC emission: compliance to EN55022 Class B; EN61000-3-2,3
    • EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
  • others:
    • MTBF: min. 692,300 h, MIL-HDBK-217F (25 °C)
    • dimensions (L x W x H): 79 x 54 x 33 mm
    • weight: 226 g
    • plug: ID 2.1 x OD 5.5 mm
    • cable length: 1 m
  • temperature: -30 °C to +50 °C
  • output voltage tolerance: ± 10 %

Customers who viewed this product also viewed


PSSE1230DN

UNIVERSAL POWER SUPPLY - 12 VDC - 3 A...

Compare

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

Belgium - English (UK)

Change