Product description
- function generator:
- crystal-based stability
- standard waveforms: sine, square and triangle
- predefined library waveforms included: sine(x)/x, sweep, ...
- oscilloscope:
- auto set-up function and X10 option
- pre-trigger function
- readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
- persistence options: colour graded, variable and infinite
- transient recorder:
- automatic storage of data
- automatic recording for more than 1 year
- record and display of screens
- bode plotter:
- automated sync between oscilloscope and generator
- logarithmic scale option
- Volt or dB display scale
- phase plot option
- spectrum analyser:
- linear or logarithmic timescale
- operating principle: FFT (Fast Fourier Transform)
- FFT input channel: CH1 or CH2
- zoom function
- in the box:
- getting started manual
- USB PC Scope+generator unit
- USB cable
Specificationsgeneral: |
---|
markers for | amplitude/voltage and frequency/time | input coupling | DC, AC and GND | supply from USB port (500mA) | | dimensions | 100 x 100 x 35mm / 3.9 x 3.9 x 1.4" |
function generator: |
---|
amplitude range | 200mVpp to 8Vpp @ 1KHz// no load | vertical resolution | 8 bits | square wave rise/fall time | 0.3µs | sample rate | 25MHz | typical sine wave distortion (THD) | < 1% | output impedance | 50ohm | frequency range | from 0.5Hz to 500KHz (sine 1MHz) |
oscilloscope: |
---|
bandwidth | two channels DC to 12 MHz ±3dB | input impedance | 1 Mohm / 30pF | maximum input voltage | 30V (AC + DC) | time base | 0.1µs to 500ms per division | input range | 10mV to 3V/division | input sensitivity | 0.3mV display resolution | record length | 4K samples / channel | sampling frequency | 250Hz to 25MHz |
transient recorder: |
---|
timescale | 20ms/Div to 2000s/Div | max. record time | 9.4hour/screen | max. number of samples | 100/s | min. number of samples | 1 sample/20s |
bode Plotter: |
---|
voltage range | 10mV, 30mV, 0.1V, 0.3V, 1V, 3V | frequency range | 1KHz , 10KHz, 100KHz, 500KHz | Frequncy start | 1Hz,10Hz, 100Hz, 1KHz, 10KHz, 100KHz |
spectrum analyser: |
---|
frequency range | 0 .. 120Hz to 12MHz | FFT resolution | 2048 lines |
minimum system requirements: |
---|
IBM compatible PC | | Windows™ XP, Vista, 7 * | | SVGA display card (min.1024 x 768) | | mouse | | free USB port 1.1 or 2.0 | |
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only. REACH communicating information according to article 33 |WEEE |