Belgium - English (UK)
Change

60 W SINGLE OUTPUT INDUSTRIAL DIN RAIL POWER SUPPLY 12 V 4.5 A - FOR PROFESSIONAL USE ONLY

DR-60-12
Removed from our assortment
This item is replaced by: HDR-60-12
Support
Downloads (2)
Warranty
Support
Compare

Features

  • universal AC input / full range
  • protection against: short circuit / overload / overvoltage
  • cooling: free air convection
  • can be installed on DIN rail TS-35/7.5 or 15
  • UL 508 (industrial control equipment) approved
  • isolation class II
  • LED indicator for power on
  • 100 % full load burn-in test
  • 3 years warranty
  • for professional use only
  • This device must be installed by a qualified person.

Specifications

  • output:
    • DC voltage: 12 V
    • rated current: 4.5 A
    • current range: 0-4.5 A
    • rated power: 54 W
    • ripple & noise (max.): 120 mVp-p
    • voltage adj. range: 11.1-13.2 V
    • voltage tolerance: ± 1.0 %
    • line regulation: ± 1.0 %
    • load regulation: ± 1.0 %
    • setup, rise time: 100 ms, 30 ms / 230 VAC 200 ms, 30 ms / 115 VAC at full load
    • hold up time (typ.): 100 ms / 230 VAC 23 ms / 115 VAC at full load
  • input:
    • voltage range: 88-264 VAC 124-370 VDC
    • frequency range: 47-63 Hz
    • efficiency (typ.): 82 %
    • AC current (typ.): 1.2 A / 115 VAC 0.8 A / 230 VAC
    • inrush current (typ.): cold start 18 A / 115 VAC 36 A / 230 VAC
  • protection:
    • overload:
      • 105-160 % rated output power
      • protection type: constant current limiting, recovers automatically after fault condition is removed
    • overvoltage:
      • 13.8-16.2 V
      • protection type: shut down output voltage, re-power on to recover
  • environment:
    • operating temperature: -20 to +60 °C
    • operating humidity: 20-90 % RH non-condensing
    • storage: -40 to +85 °C, 10-95 % RH
    • temperature coefficient: ± 0.03 %/°C (0-50 °C)
    • vibration: 10-500 Hz, 2G 10min/1cycle, period for 60 min each along X, Y, Z axes; mounting: compliance to IEC60068-2-6
  • safety & EMC:
    • safety standards: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
    • withstand voltage: input to output: 3 kVAC
    • isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
    • EMC emission: compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
    • EMC immunity: compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
  • others:
    • MTBF: min. 216,200 h, MIL-HDBK-217F (25 °C )
    • dimensions: 78 x 93 x 56 mm
    • packing: 0.3 kg; 48 pcs / 15.4 kg / 1.02 ft³

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

Belgium - English (UK)

Change