USB-PC SCOPE + GENERATOR (2 CHANNELS)
| PCSGU250 | |
|---|---|
| Popular item | |
| Support | |
|
Downloads
(6)
Warranty Support |
|
|
|
|
A complete USB-powered lab-in-a-box
Feature-packed PcLab2000-LT software for two channel oscilloscope, spectrum analyser, recorder, function generator and bode plotter. With the generator, you can create your own waveforms using the integrated signal wave editor. For automated measurements, it is even possible to generate wave sequences, using file or computer RS232 input.
Features
- function generator:
- crystal-based stability
- standard waveforms: sine, square and triangle
- predefined library waveforms included: sine(x)/x, DCV, sweep...
- oscilloscope:
- auto set-up function and X10 option
- pre-trigger function
- readouts: true RMS, dBV, dBm, p to p, duty cycle, frequency...
- transient recorder:
- automatic storage of data
- automatic recording for more than 1 year
- record and display of screens
- bode plotter:
- automated sync between oscilloscope and generator
- logatithmic scale option
- Volt or dB display scale
- phase plot option
- spectrum analyser:
- linear or logarithmic timescale
- operating principle: FFT (Fast Fourier Transform)
- FFT input channel: CH1 or CH2
- zoom function
- in the box:
- getting started manual
- USB PC scope + generator unit
- USB cable
- software on CD
- 1 x 60 MHz scope probe ( PROBE60S: INSULATED SCOPE PROBE 60 MHz )
- BNC adapter, BNC male to RCA female ( CBNC15: BNC MALE TO RCA FEMALE )
Specifications
- general:
- markers for: amplitude/voltage and frequency/time
- input coupling: DC, AC and GND
- supply from USB port (500 mA)
- dimensions: 205 x 55 X 175 / 8.2 x 2.2 x 7"
- function generator:
- amplitude range: 100 mVpp to 10 Vpp @ 1 KHz// 600 Ohm load / 0 V offset
- offset: from 0 to -5 V or +5 V max. (resolution 0.4% of full scale)
- vertical resolution: 8 bits
- square wave rise/fall time: 0.2µs
- sample rate: 12.5 MHz
- typical sine wave distortion (THD): < 1%
- output impedance: 50 ohm
- frequency range: from 0.005 Hz to 500 kHz
- oscilloscope:
- bandwidth: two channels DC to 12 MHz ± <1 dB
- input impedance: 1 Mohm / 30 pF
- maximum input voltage: 30 V (AC + DC)
- time base: 0.1µs to 500 ms per division
- input range: 10 mV to 3 V/division
- input sensitivity: 0.3 mV display resolution
- record length: 4 K samples / channel
- sampling frequency: 250 Hz to 25 MHz
- transient recorder:
- timescale: 20 ms/Div to 2000 s/Div
- max. record time: 9.4 hour/screen
- max. number of samples: 100/s
- min. number of samples: 1 sample/20 s
- bode plotter:
- voltage range: 10 mV, 30 mV, 0.1 V, 0.3 V, 1 V, 3 V
- frequency range: 1 kHz , 10 kHz, 100 kHz, 500 kHz
- Frequency start: 10 Hz, 100 Hz, 1 kHz, 10 kHz
- spectrum analyser:
- frequency range: 0 .. 120 Hz to 12 MHz
- FFT resolution: 2048 lines
- minimum system requirements:
- IBM compatible PC
- Windows™ 2000, XP, Vista *
- SVGA display card (min. 1024 x 768)
- mouse
- free USB port 1.1 or 2.0
- CD-ROM drive
Extras
-
(*) Windows™ is a registered trademarks of Microsoft Corporation
Customers who viewed this product also viewed
All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.
REACH communicating information according to article 33
WEEE
