USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

CONSTANT CURRENT LED DRIVER - SINGLE OUTPUT - 700 mA - 16 W

APC-16-700
New
Support
Downloads (2)
Support
Compare

Features

  • constant current design
  • universal AC input / full range
  • meets LPS requirements
  • protection against: short circuit / overvoltage
  • fully isolated plastic case
  • small and compact size
  • cooling: free air convection
  • IP42
  • 100 % full load burn-in test
  • suitable for LED lighting and moving sign applications
  • low cost / high reliability
  • 2 years warranty
  • class II power unit, no FG (frame ground)

Specifications

  • output:
    • rated current: 700 mA
    • DC voltage: 9-24 V
    • rated power: 16.8 W
    • ripple & noise (max.): 250 mVp-p
    • voltage tolerance: +/- 5 %
    • current accuracy: +/- 8 %
    • line regulation: +/- 1 %
    • load regulation: +/- 3 %
    • setup, rise time: 3000 ms, 200 ms / 230 VAC 1500 ms, 3000 ms, 200 ms / 115 VAC at full load
    • hold up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
  • input:
    • voltage range: 90-264 VAC 127-370 VDC
    • frequency range: 47-63 Hz
    • efficiency (typ.): 83 %
    • AC current: 0.3 A / 230 VAC; 0.5 A / 115 VAC
    • inrush current (typ.): cold start 45 A (twidth = 210 µs measured at 50 % Ipeak) at 230 VAC
    • leakage current: 0.25 mA / 240 VAC
  • protection:
    • overvoltage:
      • 27.6-33.5 V
      • protection type: shut off output voltage, clamping by zener diode
  • environment:
    • operating temperature: -30 to +70 °C
    • operating humidity: 20-90 % RH non-condensing
    • storage: -40 to +80 °C, 10-95 % RH
    • temperature coefficient: +/- 0.2 %/°C (0-50 °C)
    • vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
  • safety & EMC:
    • safety standards: UL8750, CSA-C22.2 No. 250.0-08 (except APC-16-350) approved; design refer to EN61347-1
    • withstand voltage: input to output: 3.75 kVAC
    • isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C/ 70 % RH
    • EMC emission: compliance to EN55015, EN61000-3-2 Class A, EN61000-3-3
    • EMC immunity: compliance to EN61547, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2 kV), criteria A
  • others:
    • MTBF: min. 1,145,700 h, MIL-HDBK-217F (25 °C)
    • dimensions (L x W x H): 77 x 40 x 29 mm

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change