USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

SWITCHING POWER SUPPLY - SINGLE OUTPUT - 240 W - 24 V

ELG-240-24A
Support
Downloads (2)
Warranty
Support
Compare

Features

  • constant voltage + constant current mode output
  • metal housing design
  • built-in active PFC function
  • no load / standby power consumption <0.5W
  • IP67/IP65 rating for indoor or outdoor installations
  • function options: output adjustable via potentiometer, 3-in-1 dimming (dim-to-off), smart timer dimming, DAL I
  • typical lifetime > 50.000 hours
  • 5 years warranty
  • for professional use only
  • This device must be installed by a qualified person.

Specifications

  • output:
    • DC voltage: 24 V
    • constant current region : 12 V to 24 V
    • rated current: 10 A
    • rated power: 240 W (200 VAC to 305 VAC), 180 W (100 VAC to 180 VAC)
    • ripple & noise (max.): 200 mVp-p
    • voltage adj. range: 22.4 V to 25.6 V
    • current adj. range: 5 A to 10 A
    • voltage tolerance: ± 2.0 %
    • line regulation: ± 0.5 %
    • load regulation: ± 0.5 %
    • setup, rise time : 500 ms, 100 ms / 230 VAC, 1000 ms / 115 VAC
    • hold-up time (typ.): 10 ms / 230 VAC, 10 ms / 115 VAC
  • input:
    • voltage range: 100-305 VAC 142-431 VDC
    • frequency range: 47 to 63 Hz
    • power factor: PF ≥ 0.97 / 115 VAC, PF ≥ 0.95 / 230 VAC, PF ≥ 0.92 / 227 VAC at full load
    • total harmonic distortion: THD < 20%
    • efficiency (typ.): 92 %
    • AC current: 2.2 A / 115 VAC, 1.5 A / 230 VAC, 1.2 A / 227 VAC
    • inrush current (typ.): cold start 60 A / 230 VAC
    • max. PSUs on 16A circuit braker: 4 units (circuit braker type B) / 6 units (circuit braker type C) at 230 VAC
    • leakage current: < 0.75 mA / 277 VAC
  • protection:
    • overcurrent :
      • 95 to 108 %
      • protection type: constant current limiting, recovers automatically after fault condition is removed
    • short-circuit: hiccup mode, recovers automatically after fault condition is removed
    • overvoltage:
      • 27 V to 34 V
      • protection type: shut down output voltage, re-power on to recover
    • overtemperature: shut down output voltage, re-power on to recover
  • environment:
    • working temperature: -40 °C to +90 °C
    • working humidity: 20 to 95 % RH non-condensing
    • storage temperature, humidity: -40 °C to +90 °C, 10 to 95 % RH
    • temperature coefficient: ± 0.03 % / °C (0 °C to 60 °C)
    • vibration: 10 to 500 Hz, 5 G 12 min. / 1 cycle, period for 72 min. each along X, Y, Z axes
  • safety & EMC:
    • safety standards: UL8750 (type "HL"), CSA C22.2 no. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14,GB19510.1; IP65 or IP67 approved
    • withstand voltage: I/P-O/P: 3.75K VAC, I/P-FG: 2.0K VAC, O/P-FG: 1.5K VAC
    • isolation resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohm / 500 VDC / 25 °C / 70 % RH
    • EMC emission: compliance to EN55015, EN61000-3-2 Class C (@load ≥50%); EN61000-3-3; GB17625.1,GB17743
    • EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)
  • others:
    • MTBF: 826.7K hrs min.; Telcordia SR-332 (Bellcore) ; 200.8Khrs min.; MIL-HDBK-217F (25 °C)
    • dimensions: 244 x 71 x 37.5 mm
    • packing: 1.22 kg; 12 pcs / 15.2 kg / 0.72 CUFT

Customers who viewed this product also viewed


HPS140MK2

HANDHELD OSCILLOSCOPE

Compare

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change