USA - English (UK)
Change
Based on your location we recommend you to visit http://www.vellemanusa.com

DIGITAL AUTORANGE MULTIMETER - CAT. III 600 V / CAT. IV 300 V - 15 A - 4000 COUNTS

DVM9915
Options (1)
Support
Downloads (2)
Warranty
Support
Compare

Features

  • CAT. III 600 V / CAT. IV 300 V
  • auto/manual range
  • automatic polarity indication
  • automatic zero adjustment
  • voltage measurements: 600 VAC and 600 VDC max.
  • current measurements: DC 15 A and AC 15 A max.
  • resistance measurements: 40 MOhm max.
  • with separate test leads (incl.): TLM72
  • pollution degree 2
  • Important safety information

Specifications

  • DC voltage: 0-400 mV / 4 V / 40 V / 400 V / 600 V
    • basic accuracy: ± (0.5% rdg + 2 digits) , ±(0.8% rdg + 2 digits) for 600 V range
    • input impedance: >10 MOhm
    • maximum input: 600 V
  • AC voltage: 0-4 V / 40 V / 400 V / 600 V
    • basic accuracy: ± (0.8% rdg + 3 digits) , ±(1.2% rdg + 3 digits) for 600 V range
    • input impedance: 10 MOhm
    • frequency range: 40 - 500 Hz
    • maximum input: 600 V
  • DC current: 0-400µA / 4 mA / 40 mA / 400 mA / 4 A / 15 A
    • basic accuracy: ± (1.2% rdg + 2 digits) , ±(2.0% rdg + 3 digits) for 4 A to 15 A range
    • overload protection: 0.5 A / 600 V fuse for µA to mA range, 15 A / 600 V fuse up to 15 A range
  • AC current: 0-400µA / 4 mA / 40 mA / 400 mA / 4 A / 15 A
    • basic accuracy: ± (1.5% rdg + 3 digits) , ±(2.5% rdg + 5 digits) for 4 A to 15 A range
    • overload protection: 0.5 A / 600 V fuse for µA to mA range, 15 A / 600 V fuse up to 15 A range
    • frequency range: 40 - 500 Hz
  • resistance: 0-400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm / 40 MOhm
    • basic accuracy: ± ( 1.0% rdg + 1 Ohm) for 0 to 400 Ohm range, ( 1.0% rdg + 2 digits) for 4 kOhm to 4 MOhm range, ± (1.5% rdg + 3 digits) for 40 MOhm range
    • overload protection: 0.5 A / 600 V fuse
  • capacitance: 0-40 nF / 400 nF / 4 µF / 40 µF / 100 µF
    • basic accuracy: ± ( 3.0% rdg + 10 digits) for 0 to 40 nF range, ( 2.5% rdg + 5 digits) for 400 nF to 40 µF range, ± (5.0% rdg + 10 digits) for 100 µF range
    • overload protection: 0.5 A / 600 V fuse
  • frequency: 0-10 Hz / 100 Hz / 1000 Hz / 10 kHz / 100 kHz / 1000 kHz / 10 MHz
    • basic accuracy: ± (0.1% rdg + 5 digits)
  • duty cycle: 0.1% - 99.9%
    • basic accuracy: ± (2.0% rdg + 2 digits)
    • frequency: < 10 kHz
  • temperature: -50 °C - 800 °C
    • basic accuracy: ± ( 3°C + 1 digit) for -50°C - 150°C, ( 3.0% rdg + 1 digit) for 150°C - 800°C
  • battery test: -
    • basic accuracy: -
    • overload protection: -
  • audible continuity measurement: built-in buzzer sounds if resistance is less than 30 Ohm
    • test voltage: approx. 0.5 V
  • diode measurement: test forward voltage of diode
    • test voltage: forward DC current approx. 1 mA, reversed DC voltage approx. 1.5 V
  • overrange: yes
  • continuity buzzer: yes
  • transistor test: no
  • diode test: yes
  • low-battery indication: yes
  • maximum display: 3 ¾
  • LCD display size:
    • size: 65 x 36 mm
    • digits: max. 3999
  • ranging mode: auto range and manual range
  • data hold: yes
  • backlight: yes
  • auto power-off: yes
  • operating environment:
    • temperature: 0 °C to 40 °C (32 °F to 104 °F)
    • humidity: < 80% RH
  • storage environment:
    • temperature: -20 °C to 60 °C (-4 °F to 140 °F)
    • humidity: < 90% RH
  • fuse:
    • F0.5 A / 600 V 5 x 20 mm
    • F15 A / 600 V 6 x 32 mm
  • test lead probe: CAT III 1000 V / CAT IV 600 V, 15 A, L = 75 cm
  • dimensions: 188 x 102 x 38 mm
  • weight (with battery): 325 g
  • power supply: 1 x 9 V 6F22 (incl.)
  • packing: double blister

Options


TLM72

PVC TEST LEAD SET - CAT IV 600 V - 15...

Compare

Customers who viewed this product also viewed


DVM601

6-IN-1 DIGITAL MULTIMETER - CAT. III...

Compare

DVM894

3½ DMM - 32 RANGES / 10A /...

Compare

DVM94

DIGITAL MULTIMETER - CAT. III 600 V -...

Compare

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change