USA - English (UK)
Change
Based on your location we recommend you to visit www.vellemanusa.com

SWITCHING POWER SUPPLY - SINGLE OUTPUT - 150 W - 12 V

LPV-150-12
Popular item
Support
Downloads (2)
Support
Compare

Features

  • constant voltage design
  • 180-305 VAC input only
  • fully encapsulated, IP67
  • class II power unit, no FG
  • protection against: short circuit / overload / overvoltage / over temperature
  • fully isolated plastic case
  • cooling: free air convection
  • 100 % full load burn-in test
  • low cost / high reliability
  • suitable for LED lighting and moving sign applications
  • suitable for use in dry, damp and wet locations

  • 2 years warranty
  • short circuit protection
  • overload protection
  • over voltage protection (255V)
  • thermal protection (80°)
  • waterproof protection IP67

Specifications

  • output:
    • DC voltage: 12 V
    • rated current: 10 A
    • current range: 0-10 A
    • rated power: 120 W
    • ripple & noise (max): 200 mVp-p
    • voltage tolerance: ± 5.0 %
    • line regulation: ± 1.0 %
    • load regulation: ± 2.0 %
    • setup, rise time: 500 ms, 50 ms / 230 VAC 500 ms, 50 ms / 277 VAC
    • hold up time (typ.): 18 ms / 230 VAC 20 ms / 277 VAC at full load
  • input:
    • voltage range: 180-305 VAC 254-431 VDC
    • frequency range: 47-63 Hz
    • efficiency (typ.): 87 %
    • AC current (typ.): 1.7 A / 230 VAC 1.5 A / 277 VAC
    • inrush current (max.): cold start 60 A (twidth = 900 µs measured at 50 % lpeak) at 230 VAC
    • leakage current: 0.25 mA / 240 VAC
  • protection:
    • overload:
      • 110-150 % rated output power
      • protection type: hiccup mode, recovers automatically after fault condition is removed
    • overvoltage:
      • 13.5-17 V
      • protection type: shut down output voltage, re-power on to recover
    • over temperature: shut down o/p voltage, recovers automatically after temperature goes down
  • environment:
    • operating temperature: -25 to 65 °C
    • operating humidity: 20-90 % RH non-condensing
    • storage: -40 to +80 °C, 10-95 % RH
    • temperature coefficient: ± 0.03 % / °C (0-50 °C)
    • vibration: 10-500 Hz, 2G 10 min / 1 cycle, period for 60 min each along X, Y, Z axes
  • safety & EMC:
    • safety standards: IP67 approved; design refer to TUV EN60950-1
    • withstand voltage: input to output: 3 kVAC
    • isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
    • EMC emission: compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A (< or = 80% load), EN61000-3-3
    • EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
  • other:
    • MTBF: min. 703,000 h, MIL-HDBK-217F (25 °C)
    • dimensions: 191 x 63 x 37.5 mm
    • packing: 0.74 kg; 20 pcs / 15.8 kg / 0.95 ft³
  • housing: aluminium
  • connection: leads
  • protection class: IP67
  • storage temperature: -40°C ~ 80°C
  • operating temperature: -25°C ~ 50°C

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

REACH communicating information according to article 33
WEEE

USA - English (UK)

Change